SZENT-CR600 Introduction to Self-Piercing
What is self-piercing riveting?
Self-piercing riveting is a cold joining technique used to join two or more metal sheets. The principle is to use special rivets through the hydraulic cylinder or servo motor to provide power, directly pressed into the plate to be riveted, to be riveted plate under the pressure of the rivet and the rivet plastic deformation, shaped to fill the riveting mold, so as to form a stable connection of a new sheet metal connection technology. Rivet nose first pressed by the riveted sheet, rivets are embedded by the rivet rod pressure, penetrate the upper plate, and expansion into the next layer of plates, and then the rivets and plates together with the expansion, full of rivet mold, rivets legs to the four sides of the flip to form a “button”, so as to complete the upper and lower plates firmly connected.
Working time/cycle: 150-200 times (according to the pressure change), 5-6 seconds/time.
Model No: SZENT-CR600
Pressione: 25-45KN
Motor: 20V
temperatura di lavoro: -10°C-40°C
Macchine Eettriche: 18V DC
Lithium Battery: DC 18V3Ah
N.W: 5.1Kg
G.W: 10.3Kg
Orario di lavoro: 150-200/times
Ciclo di lavoro: 5-6s/times
Corpo gancio: 45mm*26mm